Dino Makropoulos
06-12-2005, 12:41 AM
Well....it is about time!
:rolleyes: :D
Hi Guys.
What we have here is few more benefits of the Dead Wood Concept.
Now we can use the ez smart system to straight line rip one edge.
http://www.eurekazone.org/images/gallery/straightlineripb.html
Insert the self aligning guide control unit with the EZEZ reapeto for repeat cuts on both sides of the blade for pieces less than 16"
http://www.eurekazone.org/images/gallery/ezezrepeato.html
edit to include a description..
Here is a quick description on the EZEz Reapeato gallery.
Picture 1. Shows the Guide Control Unit with the fence set up to make edgings. 1/16" thick.
Picture 2. Shows the circular saw starting the cut.
Picture 3. You only have to adjust your fence once. Unlike the table saw fence that you
have to move on each and every cut (because the wood becomes smaller with
each cut).
Picture 4 Shows the first piece cut.
Picture 5. The second piece cut. You either push the wood against the fence or you move
the whole guide against the wood.
Picture 6. (the one on the ground with the ATF).
Shows the guide control unit with the extendable integrated measuring system.
The capacity of this fence is 50" and it can be used for panels or solid stock
dimensioning.
The idea is that we have one guide control unit that we can equipped with ..whatever we need.
And at the last pictures (with the ATF) the integrated measuring system
for repeat cuts up to 48". One note here. The smart clamps and the guide control unit become the table legs. In case we don't have the room for the smart table.
And without any limitations on capacity. Here you can
turn your guide into a portable dimensional mill.
http://www.eurekazone.org/images/gallery/giantmakita.html
Enjoy.
YCF Dino
Yes Tim. It was about time. :cool:
Thank you all.
:rolleyes: :D
Hi Guys.
What we have here is few more benefits of the Dead Wood Concept.
Now we can use the ez smart system to straight line rip one edge.
http://www.eurekazone.org/images/gallery/straightlineripb.html
Insert the self aligning guide control unit with the EZEZ reapeto for repeat cuts on both sides of the blade for pieces less than 16"
http://www.eurekazone.org/images/gallery/ezezrepeato.html
edit to include a description..
Here is a quick description on the EZEz Reapeato gallery.
Picture 1. Shows the Guide Control Unit with the fence set up to make edgings. 1/16" thick.
Picture 2. Shows the circular saw starting the cut.
Picture 3. You only have to adjust your fence once. Unlike the table saw fence that you
have to move on each and every cut (because the wood becomes smaller with
each cut).
Picture 4 Shows the first piece cut.
Picture 5. The second piece cut. You either push the wood against the fence or you move
the whole guide against the wood.
Picture 6. (the one on the ground with the ATF).
Shows the guide control unit with the extendable integrated measuring system.
The capacity of this fence is 50" and it can be used for panels or solid stock
dimensioning.
The idea is that we have one guide control unit that we can equipped with ..whatever we need.
And at the last pictures (with the ATF) the integrated measuring system
for repeat cuts up to 48". One note here. The smart clamps and the guide control unit become the table legs. In case we don't have the room for the smart table.
And without any limitations on capacity. Here you can
turn your guide into a portable dimensional mill.
http://www.eurekazone.org/images/gallery/giantmakita.html
Enjoy.
YCF Dino
Yes Tim. It was about time. :cool:
Thank you all.