Mike Shields
01-02-2014, 11:20 AM
In the process of planing, the wood stops moving half way thru the cut. I raised the machine to find both fed rollers are extremely tight.
Light dis-assembly found a single broken gear for the feed roller chain. The machine is well out of warrantly, but I still didnt want to take apart the feed roller gear box without a little more certainty.
Does anyone have suggestions?
Thanks,
Mike
(this maybe the nail in the coffin to replace the planer the same time I replace my jointer)
Light dis-assembly found a single broken gear for the feed roller chain. The machine is well out of warrantly, but I still didnt want to take apart the feed roller gear box without a little more certainty.
Does anyone have suggestions?
Thanks,
Mike
(this maybe the nail in the coffin to replace the planer the same time I replace my jointer)