OneWay live center

[Fred Belknap]

My Oneway live center is making a noise. Has anyone replaced the bearings on one of these? I really like the center and would like to get it fixed if possible.

[Bob Bergstrom]

Might call OneWay. There pretty good at the service of their equipment.

[Ralph Lindberg]

Can't recall ever hearing about this, call OneWay on Thursday.

[Jim Leslie]

I have the same issue with mine; not many hours on it but they seem to be shot. I'm going to look around locally and see if a bearing supply shop can replace the bearings with quality ones. Other than that, I really like it.

[Dwight Rutherford]

Great place for bearings. Very helpful. Good prices.
http://www.vxb.com/mm5/merchant.mvc?

[charlie knighton]

craft supplies says: without question the finest quality revolving center system available and an exceptional value.

multi-tip revolving center item # 103-066 comes with 2 different points and you can buy 7 others

i have the center and 3 different points.....i considered it an upgrade over the stock jet revolving center that i destroyed the bearings, while not one-way these revoling centers by precsion machine are mostly made for metal lathes that have higher quality needs