Stupid bandsaw tricks......

[Larry Edgerton]

I have been working on my own house the last few days and had just enough figured Jatoba to do my door panels in the kitchen if I resawed it and did not waste any. I had one 11" wide to resaw and I could see it was not going to fly, even with a new 1.3 woodmaster carbide and the tension cranked up. It wanted to follow the weird grain.

So I cheated. I put a thin kerf in the Minimax and cut in 1.5" on the two long edges and on the starting end. The bandsaw then followed the path of least resistance and I have my bookmatched panels. Worked like a charm.

Larry

[Michael Mahan]

I have been working on my own house the last few days and had just enough figured Jatoba to do my door panels in the kitchen if I resawed it and did not waste any. I had one 11" wide to resaw and I could see it was not going to fly, even with a new 1.3 woodmaster carbide and the tension cranked up. It wanted to follow the weird grain.

So I cheated. I put a thin kerf in the Minimax and cut in 1.5" on the two long edges and on the starting end. The bandsaw then followed the path of least resistance and I have my bookmatched panels. Worked like a charm.

Larry


I wouldn't say that was a stupid trick :)

[Tony Rodoracio]

I will have to remember that one. Thanks Larry

[Craig Behnke]

i call that clever. it's new to this woodworking rookie, so i'm going to steal it, store it away, and hopefully remember it for the next time i'm facing a similar situation.

[Peter Quinn]

I'd call it resourceful and intelligent. Like train tracks for the bs blade. At work it's standard practice for me because the bs is such junk it's required for anything above 5" resaw, interesting to hear it's still a useful trick on the best saw you can buy with a top blade. Wood will be wood! Love to see picks of that when your finished Larry.

[Jim Finn]

[QUOTE=Larry Edgerton

.......". I put a thin kerf in the Minimax and cut in 1.5" on the two long edges and on the starting end......
Larry[/QUOTE]

I have a stupid question. What do you mean by "Minimax"? Small/large? Is this a table saw?

[marty shultz]

I've done the same thing. It works great if you have enough wood thickness to work with.

[Michael Mahan]

I have a stupid question. What do you mean by "Minimax"? Small/large? Is this a table saw? MiniMax is a Italian Machinery company they are owned by SCM MiniMax is one of their brands
the MiniMax Band Saws are renowned by many , they do not advertise much if at all

[Larry Edgerton]

I have a stupid question. What do you mean by "Minimax"? Small/large? Is this a table saw?

Sorry, I have a Minimax tablesaw. I actually have and old 3 ph 20" Delta bandsaw, great saw, but not up to MiniMax standards.

[Andrew Joiner]

I have a stupid question. What do you mean by "Minimax"? Small/large? Is this a table saw?

Yes, I think Larry has a MiniMax table saw.


Here is a photo showing the kerf on 2 edges, an old practice for resawing. I think Larry also kerfed the end which I've never heard of but makes total sense.
https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRjHGPoRbi2_0y80aNpopT7u2ijN4TEd REWqXUUV55i9PSeV2Jn One could also angle the table saw blade and run a V cut all the way around your stock. Then when you part it on the bandsaw you'd get a finished raised panel. All you'd have to do is sand off the saw marks.