Flag/Challenge Coin Case Combo

[Pete Janke]

I built this for a guy at work to hold a flag and Challenge Coins from his Air Force career. It is made of oak with English Oak stain and wipe-poly. The lexan window still has the protective white paper attached to its inside face. I wasn't sure about whether to add the base. My wife was the deciding factor on adding it. The jig to make the 67 1/2 degree angles was made from scraps and an unused miter gauge. I searched on-line for flag cases and tenon jigs before building.277824277825 277826277828

[Mike Cozad]

That's very nice. And a lot of challenge coin slots! It must be much more common than when I was a sailor years ago...