View Full Version : Nails for my nailer, I hope!
Ty Partlow
05-18-2003, 12:17 AM
I am hoping someone around can help me with my problem. I have a Bostitch N95RHN framing nailer. I have been trying to find Full Round Head, 20-22 degree, 6D Galvanized Ring Shank nails for this nail gun. I have looked locally and on the internet with no luck. Amazon listed some B&C Eagle nails, but they had been discontinued. The Bostich part number is RH-S6DRGEP. Any help would be greatly appreciated
Steve K
05-18-2003, 5:36 AM
If you haven't tried the Stanley home page they have a dealer locator that may help you find your nails
Dealer locator (http://bostitch.com/default.asp?TYPE=STATICLEFT&PAGE=wheretobuy.htm&LEFT=left_wheretobuy.htm)
Steve
Joe Tonich
05-19-2003, 9:58 PM
My TOOLCRIB catalog came today and they have them I think.
Model # - 2x113HDR/22
2"x113 Ring Hot Dip Galvanized
6000 - $94.99
Model #- 238x113HDR/22
2 3/8"x113 Ring Hot Dipped Galvanized
5000 - $89.99
Hope this helps,
Joe
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.