View Full Version : Lmi SE2100

Patrick Fallacaro
12-13-2013, 3:33 PM
Hi All, I am new to this site and i have bin reading the posts on the LMI driver problems Win 98 to Win XP. My question to the EXPERTS is in the LMI SE2100 there is a hard drive that i am sure it contains the info to run the laser,LMI last version for there driver is 2.2 now is there anyway to get the info off of the hard drive in the laser and somehow make the neccesary changes for the hard drive to except the Win XP and use the same drivers provided by LMI

Thanks Pat

Jeff Belany
12-16-2013, 10:35 AM
I ran a LMI 2100 for 10 years and your best bet is to get an old computer with WIN98 to go between your new computer and your laser as a print server. Do your work on the new computer, save as Corel8, then send to the WIN98 machine and let that feed the laser. It has been done and will work. Unless you have a programmer who can modify the WIN95, WIN98 drivers to work with XP or newer. The first way is easier and not expensive. A little extra work but not bad.

Jeff in northern Wisconsin