Corel x6

[TAMI WILSON]

just upgraded to corel X6. this is probably a simple problem but it has me scratching my head. when I send a RGB 255 red hairline outline to be cut to the laser it won't cut it. it shows up blue. like there is a RGB CMYK issue. not sure how to fix it though.

Surely someone else had this problem and has figured it out. Can't be just me?? :-)

Thanks

Tami

[Mike Chance in Iowa]

There are many posts on this topic. A search on Corel X6 Upgrade will reveal lots of answers. This was the latest post a week or so ago.

http://www.sawmillcreek.org/showthread.php?210832-Corel-16-vs-14-and-13-engraving-quality (http://www.sawmillcreek.org/showthread.php?210832-Corel-16-vs-14-and-13-engraving-quality)

[Darryl Hazen]

A hairline should cut regardless of color unless you have color mapping setup wrong.

[Mark Sipes]

Trotec allows 15 different color assignments with diffrent setting... engrave, cut, none. red is just one.

[Mike Null]

On the Trotec I believe you must use the rgb palette. X6 is set to default to cmyk so you must change the color settings and I believe this link will take you through the steps. http://www.engrave.ca/archives/5318

[TAMI WILSON]

Thanks so much everyone. problem solved

tami