Kevin Berkshire
12-03-2013, 8:47 PM
I just bought EngraveLab 9 and my support time ran out and I have a lot of questions on the commands.
I am trying to line fill a letter so I can engrave it out.
I first place a letter on my layout.
Then go to Engrave and create tool path, Fill and then pick a cutter size. I pick a color, say yellow. Then set the fill style to Sweep tool down. I set the fill to 30%,then hit OK.
The fill shows on the screen, but when I send it to the engraver, it says No object to engrave.
Can anyone help.
Thanks Kevin
I am trying to line fill a letter so I can engrave it out.
I first place a letter on my layout.
Then go to Engrave and create tool path, Fill and then pick a cutter size. I pick a color, say yellow. Then set the fill style to Sweep tool down. I set the fill to 30%,then hit OK.
The fill shows on the screen, but when I send it to the engraver, it says No object to engrave.
Can anyone help.
Thanks Kevin