Kev Williams
11-18-2013, 9:50 PM
Wondering if inconel can be engraved or lasered via cermark? Based on what I read in wiki, tool engraving the stuff would be a tough prospect, as it work-hardens as it's machined. The stuff is also supposed form it's own protective oxide layer when it's heated, so I'm wondering if cermark would even stick to it?
From the info I've read, inconel is to stainless as stainless is to brass. Anyway, I have a potential customer wondering if I can engrave the stuff...
From the info I've read, inconel is to stainless as stainless is to brass. Anyway, I have a potential customer wondering if I can engrave the stuff...