PDA

View Full Version : Glass Mouth Smaller Than Engraving spot



sal shepherd
11-17-2013, 6:58 PM
Hi, I am using a Epilog 60 Watt 24X18 with Rotary att. The glass has a mouth of 4" the area of engraving it is 9". I am also using center to center option. Normally put painters tape mark centers line up and engrave. I was able to get 1 glass done right, now it shows off by 7/16" checked measurements ck. ok

Dan Hintz
11-18-2013, 7:10 AM
I'm not quite seeing a question in there...

Pete James
11-18-2013, 8:17 AM
That glass will be difficult to drink from.