Walnut tool cabinet

[John Fleming]

I'm building a tool cabinet for my shop.

274586

[John Fleming]

I'll add more details as I go. I had written a good bit more but my iPad crashed on me this is the first time I've posted using the
iPad with the forum runner app.

[Phil Thien]

Looks really terrific so far, can't wait to see if evolve!

[John Fleming]

The carcass of the cabinet is walnut. The drawers are cherry, just because I had a lot of cherry that was already resawn to
1/2 inch thickness. The drawer bottoms are made from plywood . I dovetailed the drawer fronts using through dovetails and
will face them with 1/4 walnut. I know that's not the usual way but it's what I'm doing. These two cabinets are where I got the
idea to do the cabinet I'm building. When finished it will sit on an old library table I have. The two cabinets are from a couple of
articles I saw in FWW.

[Kris Whitman]

Looks great! Keep the pictures coming....it may inspire me to build one myself.

[John Fleming]

I finally got all of my drawers glued up, I built a 90 degree jig on a work table to square the drawers as I glued them up. The jig
really was a timesaver with the quantity of drawers I have. The next step will be to attach the guides on the bottom of the
drawers . The pencil is pointing to the guides on the bottom of a drawer. I like this method because you can insert the drawer
and adjust the spacing then trace the runner on the bottom of the drawer.

[Bruce Page]

I'm looking forward to the completion. It looks great!

[glenn bradley]

Lookin' good John. Thanks for taking the time to post the process.

[Joe A Faulkner]

An inspiring cabinet. Looking forward to seeing the next update. Nice work.

[Gus Dundon]

That's a very inspiring work! Thanks for posting!