View Full Version : xmas ornament stands
charlie knighton
11-06-2013, 7:12 PM
anybody have a source for xmas ornament stands, low cost that is, i can find plenty at $8.98 for one
Bruce Markwardt
11-06-2013, 8:23 PM
Bronners has lots of different stands with prices that start at a couple bucks.
Bill Hensley
11-07-2013, 6:42 AM
Try here http://factorydirectcraft.com/catalog/categories/2149_2043_2095-christmas_ornaments.html
Bill Bulloch
11-07-2013, 7:54 AM
Why not make your own. You can buy the wire ornament stand and turn your own base. You can get them in 3" to 6" at: http://www.choice-woods.com/index.php?route=product/category&path=64_42
Jim Underwood
11-07-2013, 8:22 AM
I've made my own before. I just turn a spindle for the arched piece, and steam bend it. It's a lot more fragile than the wire, but I like the look.
Jim Underwood
11-07-2013, 8:35 AM
Ah. I knew I'd posted a picture of it. Just had to remember the right words...
http://www.sawmillcreek.org/showthread.php?91589-Remember-my-tapered-crescent-question-Here-s-the-alternative&highlight=boiled
Now this is a prototype, so of course subsequent models were a bit more graceful.
charlie knighton
11-07-2013, 2:52 PM
thanks for web sites Bruce and Bill, sure better prices
thanks for the suggestion Bill and Jim, yall might provide the prod that i need , i like you steam bent stand Jim, but do not like fragile
maybe tinker toy type, have to see what it looks like........maybe brass welding rods.....so many possibilites, so little talent
Marvin Hasenak
11-07-2013, 6:51 PM
Brass acetylene welding rods, make your own, buy the 3/32" size, they come in 36" lengths, 5 pound packs. You can make them all brass or turn a wood base for the bent wire.
Jack Gaskins
11-07-2013, 8:06 PM
+1 on Bronners, I ordered several few weeks ago for I think 2.99 each for 10" stands. Received them in just a few days after ordering.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.