Craig Behnke
11-02-2013, 9:10 PM
I've had an incra wonder fence for about 3 years and i've had mixed results using the incra right angle slider attachment when making dovetails, boxjoints, etc. My use of it was sloppy to say the least. Who knows, maybe it was operator error. A few months ago I got a jessem miter slider to get more stability. The hardware to attach the jessem slider to a fence does not work when trying to mate the jessem to an incra wonderfence. I used it for a little while with the basic incra fence but I wanted to use my wonderfence more often so I needed to make an adapter to make it work.
I finally got around to making the simple connector piece to make this unholy union work. it's just baltic birch ply, but it works great. After I use it for a few months I may try to get something fabricated from aluminum and make it less bulky and with quick attach/detach capability. we'll see.
for those of you that have the incra wonderfence setup and were on the fence about the jessem miter slider, don't let the incompatibility stop you. the attachment modification was super simple.
I finally got around to making the simple connector piece to make this unholy union work. it's just baltic birch ply, but it works great. After I use it for a few months I may try to get something fabricated from aluminum and make it less bulky and with quick attach/detach capability. we'll see.
for those of you that have the incra wonderfence setup and were on the fence about the jessem miter slider, don't let the incompatibility stop you. the attachment modification was super simple.