View Full Version : Eggbeater storage
Cody Cantrell
10-28-2013, 9:39 AM
Thought I would share a project I recently completed. This is my idea on storing my Millers Falls eggbeaters. The construction was anything but Neander as I used the router table, table saw, and a laser engraver.
Cody
273896273895
Derrell W Sloan
10-28-2013, 10:36 AM
Very cool. The laser engraving is a very nice touch.
Hilton Ralphs
10-28-2013, 10:43 AM
Very cool idea. So what guns do you have there? Two No.5s and a No.2?
Cody Cantrell
10-28-2013, 11:03 AM
I have a #1, #2, and a #05.
Jim Koepke
10-28-2013, 11:46 AM
It looks nice, but my head would likely end up with a few bumps.
jtk
Cody Cantrell
10-28-2013, 12:17 PM
It hangs above my workbench out of the way.
Jim Matthews
10-28-2013, 4:56 PM
I think the overhead grinding station is impractical.
Is your shop small? ;)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.