View Full Version : Project completion
Charlie Jones
06-02-2005, 10:32 PM
I finished this clock for my wife and our living room. Its from the plan in Wood magazine #117. I don't usually work from plans but this was what she wanted.
Corey Hallagan
06-02-2005, 11:06 PM
Nice work Charlie, Nice finish and all! There are a few of us clock builders here that love to see clocks!! Is that mahogany? The inlay looks cool too!
Corey
Jim Becker
06-02-2005, 11:12 PM
Very nice, Charlie. I have a friend in the Denver area who built this clock, so I've seen one "up close". It's a great design. Your work turned out wonderfully!
Dan Forman
06-03-2005, 3:15 AM
Charlie---Well done!!! I'm sure she is pleased with the result, and won't begrudge you that next tool you need. :D
Dan
John Hart
06-03-2005, 6:07 AM
Pretty clock Charlie! I can't get enough of clocks. They are so worthwhile and you've done a nice job. :)
Frank Pellow
06-03-2005, 7:10 AM
Nice clock Charlie. I particularly like the inlay.
Ron McNeil
06-03-2005, 7:20 AM
Charlie, nice looking clock. I'm sure your wife is pleased. :p
Charlie Jones
06-03-2005, 7:37 AM
Its cherry and my first inlay work. The hardest part was all the 22.5 and 30 miters. I used it as an excuse to buy a good aftermarket miter gauge for my TS and one of those Merle band clamps. I even cut the glass.
lou sansone
06-03-2005, 8:25 AM
nice clock
how do you get the pendelum to work with the clock sideways?;)
lou
Gary Whitt
06-03-2005, 8:38 AM
Nice job on the clock.
Wes Newman
06-03-2005, 10:30 AM
Charlie, very nice clock. I love clocks, there is just something about them.
Charlie Jones
06-03-2005, 4:02 PM
thanks guys, By the way Lou I ordered the ACME antigravity clock module from
the Intergalaxy catalog # 800010 dated stardate 3336.38.4
lou sansone
06-03-2005, 4:10 PM
thanks guys, By the way Lou I ordered the ACME antigravity clock module from
the Intergalaxy catalog # 800010 dated stardate 3336.38.4
hey ... excellent choice I was thinking about getting one myself
lou
Ernie Nyvall
06-03-2005, 4:33 PM
Real nice clock Charlie. Good job on the miters and inlay. It's beautiful.
Ernie
Dale Rodabaugh
06-03-2005, 5:00 PM
:) Great work Charlie:)
Vaughn McMillan
06-03-2005, 5:56 PM
nice clock
how do you get the pendelum to work with the clock sideways?;)
lou
And here I was getting all geared up to make some wise comment about the pendulum swinging up and down, and I see others have already beaten me to it. :p
Nonetheless, it's a beautiful clock, Charlie, and the inlay is very nice. Also good to see you wisely used it as justification for more shop goodies.
- Vaughn
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.