My new Keller Journyman Dovetail setup.

[Rick Potter]

With a nod to Phil Thien's setup, and the Peachtree dovetail clamps, here is what I have come up with.

This is the basic jig, with T' slots on all sides

272558



On the left are clamps for three thickness's of wood....1/2", 5/8", and 3/4". On the right are two styles of stops for repeatability.

272559



Sorry, duplicate.....too dumb to remove

272560



The stop and clamps in use.

272561



The first dovetail off the jig.........first try.

272562



A stack of sacrificial fences. The fence below the 'T' track is replaceable.

272563


Hope this goes through,
Rick Potter

[Phil Thien]

Nice job. I like the clamps you made for the t-slots, that is going to save a lot of time and screwing around.

I will swipe that on my next version. :)

[Rick Potter]

Thanks, Phil,

I already have a couple improvements.

Rick P