Custom size metal frames

[bob pfohler]

I need to find frames for some sublimated signs we're printing. The sign size is 15.25"x22.25, anyone have a source for custom brushed aluminum frames? Tried michaels and they want $103.50 with no glass. What a joke!

[Dan Hintz]

I'd be looking for frame material rather than a pre-made frame of that size. Should cost a couple of bucks per foot that way

[bob pfohler]

I'd be looking for frame material rather than a pre-made frame of that size. Should cost a couple of bucks per foot that way Well I'm not, it could potential be 100 frames 15"x22.5" . It's not my expertise and I don't have the fabrication equipment. Besides, it's a huge institution that it's for isn't concerned with cost as much as appearance.

[Dan Hintz]

Okay, but should you change your mind... all that's involved is a non-ferrous metal cutting blade on your chop saw and corner brackets that should slide right into the channel. You should be able to make a frame in under a minute once you set up the stops on your saw.

[Keith Outten]

I cut aluminum picture frames with my Dewalt chop saw and a standard carbide blade. Been doing it this way for years as I purchased all of the aluminum stock from a a frame shop that was going out of business many years ago and I have boxes of full length sticks stored in my barn. Although I know people who cut aluminum framing on a table saw I don't like the idea at all unless you build a slider that will lock the pieces to the slider while they are being cut. The chop saw has a means to tighten the frame material so it doesn't move and you don't have to rely just on your grip.