Will PVC board stick to MDF?

[dirk martin]

I'm going to be gluing MDF in close proximity to PVC board....you know, that stuff that looks like lumber, but's 100% PVC.
I don't want the two to stick together....even if clamped together, and glue oozes from one to the next.
Any ideas if it'll stick, or do I just need to try and see?
Titebond II will be used.

[Justin Ludwig]

Can you not put tape on the PVC board? The glue sticks to tape when you pull them apart, sand it off.

[Adam Diethrich]

Can you not put tape on the PVC board? The glue sticks to tape when you pull them apart, sand it off.

Or even some wax paper between the joints?

A.W.D.

[Lee Schierer]

I doubt that PVA glue will stick very well to PVC. PVC isn't very porous. Take a scrap piece of pvc and put a drop of glue on it. Let it set over night and see if the drop is stuck to the pvc.