View Full Version : Need some help Corel Draw and trotec Job Control

Greg W Watson
09-27-2013, 2:47 PM
I have a design in Corel that is just a straight cut job. I go to print it and when it gets into job control my red hairline cut out lines are now black etch lines. Has anyone ever had this happen?

Thanks in advance


Mike Null
09-27-2013, 3:30 PM
I can't get to my pc at the moment but I would check the settings you have made in JC. Next to each color it offers options to engrave, cut, and skip. See if that might be your issue.

Greg W Watson
09-27-2013, 3:53 PM
I got it figured out. The original was an .ai file that I imported into Corel. I saved the .ai as a .eps and re-imported it and it worked. Weird.


Tony Lenkic
09-27-2013, 5:07 PM
Usually that happens when you have some weight to the line.
Make sure it is set as RGB hairline in Corel.