View Full Version : lasering a spiral pulley system
stan kern
09-21-2013, 5:19 PM
http://youtu.be/9rBnCf2Zuzc
used mahogany plywood to cut these parts 60% power .60 speed took about 10 min for the whole project
interesting design
Dan Hintz
09-21-2013, 5:21 PM
I love eccentric gear designs... and the fact that this one looks like a Nautilus is icing on the cake.
Dennis Watson
09-21-2013, 6:14 PM
That is neat.
stan kern
09-21-2013, 6:25 PM
it was interesting that it worked
Chad Fitzgerald
09-22-2013, 10:01 AM
that is neat. any chance you would shared the corel file? thanks chad
Dennis Watson
09-22-2013, 12:29 PM
Nautilus gear drawings is on thingiverse but in STL files. Looking for a converter now.
stan kern
09-22-2013, 1:35 PM
its not corel its a 3d file SolidWorks Assembly Document (.SLDASM)
also i don't know how to upload it ,computer will not even in a*.rar format
Lee DeRaud
09-22-2013, 5:37 PM
Haven't looked at it since I don't have the right SW on this computer, but there's a DXF here: http://www.thingiverse.com/thing:27233/#files
Dennis Watson
09-22-2013, 6:52 PM
They just did the one piece a dxf, the other needed files are STL. These guys are making these on 3D printers.
stan kern
09-23-2013, 12:56 PM
the download is good ,just make 2
Bruce Hoffman
09-23-2013, 7:21 PM
Another possibility:
Nautilus Gear motorised display cdr, pdf and mts using bamboo barbecue skewers as axle also uses the flexible hinge for the box
http://www.thingiverse.com/thing:94608
Vicki Rivrud
09-25-2013, 7:53 PM
Thanks Bruce, nice find . . gotta try this one. Looks like fun. Vicki
Lee DeRaud
10-09-2013, 10:49 AM
Another possibility:
Nautilus Gear motorised display cdr, pdf and mts using bamboo barbecue skewers as axle
also uses the flexible hinge for the box
http://www.thingiverse.com/thing:94608 Aaarrggh! Finally got around to looking at that file: it's X5 format. Anybody willing to convert it to X4 and attach it here? (The DXF version imported ok, but with thousands of extraneous nodes.)
Bruce Hoffman
10-09-2013, 12:09 PM
272524
Hope this works, Lee.
Lee DeRaud
10-09-2013, 1:49 PM
Thanks...I'll see how it goes when I get it upstairs. I find it odd that my X4 doesn't display any errors when trying to load an X5/X6 file, it just hangs.
Lee DeRaud
10-09-2013, 2:14 PM
Yup, that worked fine. Thanks again.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.