View Full Version : Why is finish fogging?
Craig D Peltier
09-18-2013, 10:56 AM
Rep used the word blushing as a possibility. It is a milky white when it should be a clear. It is not completely consistent but it is over most of the project. I noticed some condensation in the air line.
271146
Prashun Patel
09-18-2013, 11:08 AM
what type of finish?
I've experienced this to be trapped solvent or moisture with shellac.
Craig D Peltier
09-18-2013, 11:25 AM
Sherwin Williams lacquer hi build.
Steve Schoene
09-18-2013, 11:51 AM
I notice you are from the Seattle area. That spells humidity, you needed to use the thinner specified for high humidity--your SW dealer should know. A dehumidifier would also be of assistance.
David Hawxhurst
09-18-2013, 1:42 PM
if you have water in the lines you need a air drier. water in the finish can/does create "blushing".
Craig D Peltier
09-21-2013, 9:49 AM
Thanks for the help.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.