steven c newman
09-11-2013, 3:54 PM
Had a couple saws that were in need of a cleanup. One was getting very rusty. Took it outside, placed a plank on top of the new saw bench, and sanded away all the red stuff. Some metal polish and fine steel wool under the sander was next. then the handle was cleaned up, and the brass all shined up.270710270711270712270713An tech is just barely there. Something about "Plymouth Rock". Medallion says it is a Pheonix Warranted.
as for saw #2. Plate just needed scrubbed down, but the tote needed cleaned back to bare wood. Brass got shined up as well270714270715270716Haven't found any etch on it, yet. It does have a nib, though. Medallion is another Pheonix Warranted. Bolts are brass. I think you all know the third saw in the group. These three saws cost a whopping $1.57 !!
third saw to be cleaned up, while the BLO cured on the #2 saw. It is just a Warranted Superior 10 point crosscut saw, just over 20" long. I shined the steel hardware up, as the rest wasn't too bad270717
Nibbed saw is a 7 pointer, and the Plymouth Rock saw is a 9pointer. Not too bad?
as for saw #2. Plate just needed scrubbed down, but the tote needed cleaned back to bare wood. Brass got shined up as well270714270715270716Haven't found any etch on it, yet. It does have a nib, though. Medallion is another Pheonix Warranted. Bolts are brass. I think you all know the third saw in the group. These three saws cost a whopping $1.57 !!
third saw to be cleaned up, while the BLO cured on the #2 saw. It is just a Warranted Superior 10 point crosscut saw, just over 20" long. I shined the steel hardware up, as the rest wasn't too bad270717
Nibbed saw is a 7 pointer, and the Plymouth Rock saw is a 9pointer. Not too bad?