Kevin Arceneaux
05-29-2005, 11:59 AM
I was using a large diameter hole drill bit and did not clamp the wood down. BIG MISTAKE. The bit grabbed the wood and spun it - at groin level. It hurt and is still annoying me. OF course on the back of the packaging, it stated to clamp the wood down.
Another question about safety - when using a dado blade, I noticed when using it on plywood, some large peices at the back of the board would fly off - it stung. Use a backer board?
Another question about safety - when using a dado blade, I noticed when using it on plywood, some large peices at the back of the board would fly off - it stung. Use a backer board?