Martin James
09-02-2013, 7:59 PM
Hi all. I am getting ready to order a 600 1000 dual tube shenhui. (600x900 work area) It will have a 60 general (head fixed left and origin left)and 150 reci tube.
I remember reading that several users recommended extra doors, but now I can't seem to figure out exactly what was ment by that. I know that some brands of lasers have better access to the first mirror via a door, and that some doors have protection switches that keep the laser from firing if the doors are open.
Do I need to order extra access doors? and if so where?
I am only ordering extra lenses, 1 extra 60 watt tube, both rotaries, honeycomb table,
and set of mirrors. No spare board, no spare driver etc. This machine will not be in daily production. Any comments appreciated.
Thanks in Advance. Marty
I remember reading that several users recommended extra doors, but now I can't seem to figure out exactly what was ment by that. I know that some brands of lasers have better access to the first mirror via a door, and that some doors have protection switches that keep the laser from firing if the doors are open.
Do I need to order extra access doors? and if so where?
I am only ordering extra lenses, 1 extra 60 watt tube, both rotaries, honeycomb table,
and set of mirrors. No spare board, no spare driver etc. This machine will not be in daily production. Any comments appreciated.
Thanks in Advance. Marty