Paul Catterson
09-01-2013, 5:24 PM
Greetings all. I have uncovered a early style brace with no maker's marks (they've rusted over or worn away). The thumbscrew-secured chuck doesn't quite match anything I've seen (also someone has replaced the screw) Any ideas?
(AMENDMENT Sept 2 2013:
I neglected to note that there is a 7/8" long horizontal alignment post sticking out from the stationary side of the chuck. Shown at top right of photo 3, it's hard to see given the head-on angle of the picture)
(AMENDMENT Sept 2 2013:
I neglected to note that there is a 7/8" long horizontal alignment post sticking out from the stationary side of the chuck. Shown at top right of photo 3, it's hard to see given the head-on angle of the picture)