Keith Outten
08-27-2013, 11:20 AM
diyCAM
Simple CAM Software for Hobbyists!
Matt Mitman has donated two licenses of his diyCAM: CARVE software for our next FreeStuff Drawing.
There will be two winners names drawn on Tuesday September 10th 2013.
diyCAM: Carve is the first in a planned suite of easy to use and inexpensively priced CAM programs targeting DIY CNC Router users.
- Quickly and easily generates GCode from images for 3D Carvings and Lithopanes
- NEW! Calculate Profile Path from Alpha Channel of an image to cutout your carving
- 3D carving simulation/preview with both result and path visualization
- Hog Pass to remove the bulk of the material followed by the detailed Carve pass for faster carvings
- Bit and Material managers
Matt Mitman
124 Academy St, Chester, SC 29706
www.diy-cam.com
support@diy-cam.com
CLICK HERE (http://www.sawmillcreek.org/showthread.php?207114-FreeStuff-Drawing-diyCAM-Carve-Software&p=2148514#post2148514) if you would like to enter this drawing.
Simple CAM Software for Hobbyists!
Matt Mitman has donated two licenses of his diyCAM: CARVE software for our next FreeStuff Drawing.
There will be two winners names drawn on Tuesday September 10th 2013.
diyCAM: Carve is the first in a planned suite of easy to use and inexpensively priced CAM programs targeting DIY CNC Router users.
- Quickly and easily generates GCode from images for 3D Carvings and Lithopanes
- NEW! Calculate Profile Path from Alpha Channel of an image to cutout your carving
- 3D carving simulation/preview with both result and path visualization
- Hog Pass to remove the bulk of the material followed by the detailed Carve pass for faster carvings
- Bit and Material managers
Matt Mitman
124 Academy St, Chester, SC 29706
www.diy-cam.com
support@diy-cam.com
CLICK HERE (http://www.sawmillcreek.org/showthread.php?207114-FreeStuff-Drawing-diyCAM-Carve-Software&p=2148514#post2148514) if you would like to enter this drawing.