Trevor Howard
08-26-2013, 12:22 PM
Hi, I have a friend who asked me to wire up an Old Oliver Lathe. Researching it appears to be a model 51, I am not sure. He has another one which I wired up to be used on an Inverter. It was wired like either Fig 10 or 12 in the attached JPEG. On the first one I was able to ohm out the windings and figure which way it was wired. On this second one the Ohm readings I got are not making sense (see attached PDF)
I am an industrial Electrician for 20 years, but have never came across a motor like this. Can anyone offer assistance or point me to the right infomation.
This will be wired directly to the inverter by passing the contactor and speed Switch.
Thank you for any assistance
I am an industrial Electrician for 20 years, but have never came across a motor like this. Can anyone offer assistance or point me to the right infomation.
This will be wired directly to the inverter by passing the contactor and speed Switch.
Thank you for any assistance