Dan Gill
05-27-2005, 11:37 AM
A friend wants me to make a Pottery Barn bed for him, and the posts have turned feet and finials. I've been looking for a source, but all I've found is some at Rockler. They're just a bit pricey at 11 or 12 bucks each (which comes out to 24 bucks per post. I'd like to find a less expensive source.
Also, this is to have a trundle, and I'm looking for rollers or wheels that are suitable. I found some underbed box rollers, again at Rockler, but I'm not sure they're adequate for the purpose. THey are rated for 80 pounds each, and screw to the side of the case.
Thanks for any help and advice.
Also, this is to have a trundle, and I'm looking for rollers or wheels that are suitable. I found some underbed box rollers, again at Rockler, but I'm not sure they're adequate for the purpose. THey are rated for 80 pounds each, and screw to the side of the case.
Thanks for any help and advice.