Bill Huber
08-18-2013, 9:21 PM
I got the I-Box a little over a year ago and made a few box joints at that time and then had to do a bunch of other projects.
Today I need to make a recipe box for my daughter, she wanted it just like the one I had made for the wife. So out came the good old I-Box, the last box joints I had made were with 1/4" and now I am going to use 3/8".
Installed the bit, put the I-Box on the router table, did the kiss calibrate and then a test cut. Just a little tight so made the adjustment and off I went, took all of 5 min. to install, set up and start making cuts.
The thing is so easy to use and set up, I just love a tool that works like it is advertised.
Today I need to make a recipe box for my daughter, she wanted it just like the one I had made for the wife. So out came the good old I-Box, the last box joints I had made were with 1/4" and now I am going to use 3/8".
Installed the bit, put the I-Box on the router table, did the kiss calibrate and then a test cut. Just a little tight so made the adjustment and off I went, took all of 5 min. to install, set up and start making cuts.
The thing is so easy to use and set up, I just love a tool that works like it is advertised.