View Full Version : Half Inch Acrylic
Steve McKee
08-16-2013, 10:13 AM
I have a customer that wants some pieces cut from 1/2 inch clear acrylic which I thought I would be able to get from one of my usual suppliers however I just checked their websites and no one seems to carry 1/2 inch. Anyone know of a supplier that does carry this thick of material? I only need 1 sheet of 12 x 24.
Thanks,
Steve
Gary Hair
08-16-2013, 10:24 AM
http://www.delviesplastics.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=DPI&Category_Code=Clear_Acrylic
Ross Moshinsky
08-16-2013, 10:24 AM
Delvies. I'd also call around a couple of local acrylic/plastic fabricators. Often they have scrap pieces laying around they are willing to sell off. That's what we do quite often.
George M. Perzel
08-16-2013, 11:20 AM
Try McMasters-Carr
They have clear acrylic up to 4" thick
Best Regards,
George
Laserarts
Keith Outten
08-16-2013, 1:29 PM
Steve,
If you enter SawMill on checkout you will receive a 10% discount at Delvies Plastics, they are an Advertiser/Sponsor here at The Creek.
http://www.sawmillcreek.org/advertisers.php
Steve McKee
08-16-2013, 1:40 PM
I had looked at Delvies and apparently had not had enough coffee yet, totally overlooked the 1/2 inch.
Thanks for the info Keith. I do order from them from time to time and was not aware of that.
Steve
Robert Silvers
08-20-2013, 4:21 PM
Steve,
If you enter SawMill on checkout you will receive a 10% discount at Delvies Plastics, they are an Advertiser/Sponsor here at The Creek.
http://www.sawmillcreek.org/advertisers.php
That has expired. Is there a new code? Thank you.
Keith Outten
08-21-2013, 4:37 AM
Robert,
I will check on the code.
.
Greg W Watson
09-11-2013, 4:01 PM
Any word on new code?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.