View Full Version : Buffing lacquer question
Joe McMahon
08-13-2013, 12:26 PM
I made a jewlery box and sprayed it with rattle can gloss lacquer. I want to polish and wax it a bit. I have a beall system for my turning and I was wondering if I should just wax it or should I use the white diamond compound first before carnuba wax?
Mike Henderson
08-13-2013, 12:52 PM
The white diamond grit can lodge in the grain unless the surface is very smooth. I've used the Beall system many times and it produces a very nice finish if the surface is very smooth.
Mike
Joe McMahon
08-13-2013, 1:05 PM
It has five coats of lacquer but I can see some slight "pock marks". The are not deep and are imperfections in the lacquer finish. I thought the buffing might fix them?
Mike Henderson
08-13-2013, 2:44 PM
It has five coats of lacquer but I can see some slight "pock marks". The are not deep and are imperfections in the lacquer finish. I thought the buffing might fix them?
Give it a try in a place where it won't be seen - maybe the back - and see how it comes out.
Mike
Joe McMahon
08-13-2013, 3:11 PM
I did just that and it turned out pretty well. Thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.