Wrench for DeWalt RAS GWI

[John Padgett]

Hello. I want to make a wrench for the arbor nut on my 10" RAS. The saw is in storage right now and I cannot get to it. Using Sketchup to draw a diagram. Anyone know the outside diameter of the arbor nut? Thanks. John.

[Rian de Bruyn]

myne is 28mm
sorry do not know what it is in inches

[David Delo]

You can buy one for less than 10 bucks. Park Tools SCW-14. It's a 14mm that works great. Think I bought it off of Amazon but many bike shops carry it also.

[Thomas Hotchkin]

John
My GWI arbor nut wrench has a 1" opening it's about 10" long made from 1/8" steel. The other end has a 9/16" opening for motor shaft. Dewalt saws came with two wrenches one for motor shaft and the other arbor nut. I only have the one wrench, I ground down 9/16" open end wrench to 1/8" thickness to slip on to the motor shaft. Hope this helps. Tom

[John Padgett]

Thanks for the help. I would normally just order one but wanted to do some metal working.