Delta Milwaukee Jointer

[Pat Rodgers]

I have acquired an older Delta Milwaukee jointer. The serial number plate shows the serial number as 111-299 and the address as Pittsburgh 8, Pennsylvania. It has three 6” blades, a Depth Gauge (0”-1/2”) and a Auto Set Jointer Fence (0-45 degrees). Does anyone know the model number so I can be on the lookout for manuals, parts lists, etc

[Myk Rian]

Good luck getting parts from Delta or ereplacements. com
What parts do you need? OWWM might be your best bet, or ebay.

[Keith Bohn]

Based on the serial number it's a 1954 No. 37-220. Parts lists are/can be found on the Vintage Machinery site under both Delta and Rockwell. I'd suggest printing them all as they vary in information. That jointer was made and sold for decades so don't hesitate to print the newer manuals/parts drawings.

[Michael W. Clark]

I have a 37-220 as well. Nice little jointer. The manuel is available on-line. If you cant find it let me know.

[HANK METZ]

I had to change the cutterhead bearings on mine, it's about the same vintage as yours (a little older).


http://www.youtube.com/watch?v=D0eTfL2O8K4