Alan Arnup
08-07-2013, 5:34 AM
Having just looked at Roger Chandler's haul of Box Elder I wonder
how many clocks like this could be made from it.
I turned the base, then a rim and then a small rebate at the back
of the rim. Next I cut a disc of acrylic and drilled a hole in the
middle and pressed the clock in firmly.
Finally a few drops of Superglue and stuck the acrylic into the
rebate of the rim.
Overall it measures around 4½" high.
Any comments welcomed.
Alan
how many clocks like this could be made from it.
I turned the base, then a rim and then a small rebate at the back
of the rim. Next I cut a disc of acrylic and drilled a hole in the
middle and pressed the clock in firmly.
Finally a few drops of Superglue and stuck the acrylic into the
rebate of the rim.
Overall it measures around 4½" high.
Any comments welcomed.
Alan