PDA

View Full Version : Text Issue



Eddie Castaneda
07-31-2013, 7:29 PM
I'm Engraving a Dumb Die today for a Job and I'm using the Rotary since it s a Round Surface. I'm having a issue with the Text, it looks like they lines are out of place. I have attached a picture. IF you look around the 1's they almost look like they have humps. 267657

Scott Shepherd
07-31-2013, 7:48 PM
Hi Eddie, I'm not seeing what you're seeing. The only humps I see in the 1's are ghost images of previous engravings. You can see the image of a "2" behind the 1's, which is the only humps I'm seeing. I do see the jagged edges on the "-", but I'm not seeing anything on the "1".