Blium Inset Hinge

[Peter Stahl]

Anyone do Inset Cabinet Doors with Blum Motion Clip Top Hinges? If so do you remember which Hinge and Mounting plate you used? These will be for cabinets with no face frames. Also which ones did you use, 100°, 120°, etc.

thanks, Pete

[Jay Jolliffe]

I just did a kitchen & used the 120 deg hinges #B071T5650 with the 9mm clip mounting plates # B175h5030.21.

[Jamie Buxton]

AFAIK, the B071T5650 hinges are not Blumotion, aka soft-close. Blum does have 110 degree hinges with soft-close built in to the hinge cup -- B073B3550. To add soft-close to the B071T5650 hinges, Blum sells the 973A parts.

[Peter Stahl]

Thanks for the replies. Looks like I need the Full Cranked hinges or use a thicker plate? Any comments or tips are appreciated. The only euro hinges I used so far are the crappy ones from the big box store.

[Jamie Buxton]

...Looks like I need the Full Cranked hinges or use a thicker plate?...
You got it. You can use a full crank hinge and a 0 mm plate, or thicker plates with half-crank or straight hinges, or wood blocking with 0 mm plate and half-crank or straight hinges.