Boluwaji Omisore
07-10-2013, 9:09 AM
I am in the process of building a cyclone, I plan to use Oneida cyclone body and filter (cheap CL find) with Bill Pentz's drawings for the motor housing and his recommend motor. The issue I am having is sourcing and impeller at a reasonable price. Grizzly has a 15.5" keyed impeller with 24mm(0.944882) bore for $104 shipped compared to 225 plus shipping for Clearvue 15". My question is will an impeller with bore 24mm(0.944882) and 7/8 shaft size work together?
Impeller
http://www.grizzly.com/parts/P0441014A
Motor
http://www.electricmotorwarehouse.com/120554.htm
Cyclone Body
http://www.oneida-ai...A-D46574885567} (http://www.oneida-air.com/inventoryD.asp?item_no=SSX060000&CatId=%7BAF788678-CC99-4A98-A11A-D46574885567%7D)
Dust Collector
http://www.grizzly.c...Series/G1030Z2P (http://www.grizzly.com/products/3-HP-Dust-Collector-with-Aluminum-Impeller-Polar-Bear-Series/G1030Z2P)
Impeller
http://www.grizzly.com/parts/P0441014A
Motor
http://www.electricmotorwarehouse.com/120554.htm
Cyclone Body
http://www.oneida-ai...A-D46574885567} (http://www.oneida-air.com/inventoryD.asp?item_no=SSX060000&CatId=%7BAF788678-CC99-4A98-A11A-D46574885567%7D)
Dust Collector
http://www.grizzly.c...Series/G1030Z2P (http://www.grizzly.com/products/3-HP-Dust-Collector-with-Aluminum-Impeller-Polar-Bear-Series/G1030Z2P)