View Full Version : PC OmniJig vs Incra LS System
tim walker
07-09-2013, 9:02 PM
I have the Incra LS precision router system already. I have had a difficult time(or so it seems) to mastering the art. Would I be happier with the OmniJig or just keep practicing with my Incra until I get the knack?
Richard Coers
07-09-2013, 9:07 PM
My opinion for ease of use based on my favorite dovetail fixture and your two choices, 1) Keller 2) Omnijig 3) Incra
Mike Goetzke
07-09-2013, 9:58 PM
I had an Incra system and loved the fence but hated re-reading how to make joints. The new style Omnijig came out and was on sale so I picked one up when I decided to make kitchen cabinets. Still takes a few trials to get a good joint with BB ply because the thickness seems to be different every time I buy some but I mill my own lumber and the jig they provide to set router bit depth is spot on all the time. Made quick work of many many DT's.
Mike
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.