Air hose fitting ULS VL350

[Francisco Montes]

I have a VLS3.50 and I am looking for the fitting that connects my air compressor hose to the back of the engraver. I know it is posted here but I have not been able to find that thread.

Any help would be appreciated.

Francisco

[Lee DeRaud]

I ordered mine direct from ULS, $22 at the time. It looks like it should be a standard fitting, but it doesn't match anything I've ever seen.

[Sandy Henry]

I got mine much cheaper at a garage that works on semi tractor engines. They had a large selection of brass fittings used for truck air- brake lines.

[Lee DeRaud]

I got mine much cheaper at a garage that works on semi tractor engines. They had a large selection of brass fittings used for truck air- brake lines.I knew it had to be something standard but the local hardware and auto parts dealers were a bust.
Then again, big-rig repair places are not thick on the ground in suburban SoCal. :p

[Joseph Tovar]

Here's the thread...
http://www.sawmillcreek.org/showthread.php?152841-ULS-Air-assist-compressor-recommendation&p=1576796#post1576796

[Matt Turner (physics)]

McMaster has a sheet with actual-size pictures of all the air-hose fittings they carry. It's a handy reference. http://www.mcmaster.com/#6534KAC