Incra Build-it System

[Steve Keathley]

Does anyone have any experience with this? It looks pretty handy and I know they make good stuff.

I'll get around to building my own jigs eventually, but I have some projects I need to get started on and this looks like a relatively quick way to make some handy jigs.

[mike holden]

I have got a crosscut sled made from this. It works well, but is quite expensive for what you get.
Only advantage over homemade is the t-track for a hold down and the adjustable track bars.
Both are easily home made.

Bottom line: make your own

Mike

[Ed Baggett]

I purchased one a while ago. I basically used to try out different jigs. When one Works well, I remake it from scratch to fill my needs, and use the Incra System to design my next jig. I the shakes so I make a lot of jigs

[Steve Keathley]

I purchased one a while ago. I basically used to try out different jigs. When one Works well, I remake it from scratch to fill my needs, and use the Incra System to design my next jig. I the shakes so I make a lot of jigs
That's kind of what I was thinking of doing. Thanks.