View Full Version : Finishing the finish

Brian Hale
05-22-2005, 5:17 PM
Can you save me some experimenting......

Do i need to change my method for finishing the finish for WB Lacquer? I normally finish NC Lacquer by sanding with 320 to knock off the nibs, Even the shine with Meguiars Fine Cut Cleaner and finish with Meguiars polish.

Do i need to do any thing different with WB finishes?

Brian :)

Jim Becker
05-22-2005, 7:05 PM
Depends on the particular product, but you should be able to do the same things once the finish is cured. The water just serves to help move the finsh from your gun to the project...the finish, itself, is what counts. Your best bet is to ask the particular manufacture of a product what the recommend (or not) for a specific formulation in this respect.

Brian Hale
05-22-2005, 7:20 PM
Thanks Jim
This is the Oxford USL.
I kinda figured it would be the same but......