Another "scraps" project

[Rich Engelhardt]

Not real pretty - but - functional & aside from some 1/2" #6 screws for the piano hinge, free.
I had to replace the roof on a tool shed and had some 1/2" OSB left over.
I recalled a project from an old issue of Wood magazine where they used 1/2" Baltic Birch to make a Kreg jig organizer so I figured why not use the USB.

[Frederick Skelly]

Thats neat Rich. Looks like a good use of material to me. Thanks for sharing it with us.
Fred

[bobby milam]

Nice idea. Thought about making it 3 doors so you can access the side storage while the center is in use?

[Rich Engelhardt]

3 doors is a great idea! Thanks!

[Tom Hammond]

Fellow NEO-ite: Can't leave anything alone, eh? Me neither. After seeing yours, I'm thinking of modifying mine by adding an undercabinet and drawer(s). Been looking for a place to keep all those GD screws and bits anyway.

265560

[Rich Engelhardt]

Tom,
I keep the screws in some of those plastic stackable bins. Menards, down in Massillon, runs them on sale (the bins) fairly often for $.50 ea w/a $.50 rebate - making them free.
The compartment dividers inside are more for strength than anything else - but - it is a handy place to store the drill and driver bits.

[Ed Baggett]

Thanks - I use a lot of scrapes to make shop accessories