finishing laundry room shelves

[Andrew Fleck]

I finally made the plunge and ordered myself a sprayer. It's a Fuji Mini Mite 3 hvlp turbine. My first project to try it out on is some laundry room shelves I made out of poplar. I was wondering what your thoughts are on a good finish combination to use on them. I would like them to be a satin white and I was thinking of using the General Finish Enduro acrylic to get them white. I'm not sure what to use over that. These shelves will obviously see a fair amount of abuse with heavy detergent containers sliding on and off. I don't know much about spraying but I do know that I do not want to use latex, especially on shelves. Any help is appreciated.

[John TenEyck]

I didn't know there was a pigmented Enduro Acrylic, but there is an Enduro White Poly which is an excellent product and no topcoat would be needed. I would probably either use GF's pigmented primer underneath or BIN.

John

[Andrew Fleck]

Thanks John. I meant to type poly instead of acrylic. I will give it a try with the primer under it. Thanks for the info.