Tim Boger
05-12-2013, 11:00 AM
I use this sander almost exclusively to dimension small lengths of material that will be cut into segmented work and for flattening rings before assembly ..... I will on occasion use it on a cutting board or two as well.
80# has become the only grit I've used for the longest time and find it works best for my needs.
My objective is to get a better quality product and a lessor cost per cut to length roll.
My question is, what type of roll material would you folks recommend that I can cut to length myself and where might I purchase it?
Thank you,
Tim
80# has become the only grit I've used for the longest time and find it works best for my needs.
My objective is to get a better quality product and a lessor cost per cut to length roll.
My question is, what type of roll material would you folks recommend that I can cut to length myself and where might I purchase it?
Thank you,
Tim