Aztec Calendar

[bryan henderson]

Does anyone still have a good version of the Aztec calendar or can direct me to the best version available for laser engraving

Bryan

[Bill Cunningham]

Several good ones have been posted here over the years.. A search should turn them up.. I would post the link, but then I would be spoiling the 'search' fun...:D

Oh Ok here it is...Keith posted one in 2006...

Aztec/Mayan Calendar (http://www.sawmillcreek.org/aztecai.zip)

[Jesse Anderson]

I think Epilog Laser has one available to all to use .. I think it is in the sample section if i am not mistaken,

[Vaughan Raymond]

I have one that I cleaned up a lot. It is .dxf if that's the format you want.

[Ron Burns]

Here's one based on the calendar Bill Cunningham uploaded. I spent a few hours on it closing up curves so that they could be filled.
I've included both here..unfilled in Corel Draw format and filled in Illustrator. Nice to have a decent vector that can be enlarged without loss

Ron

[Dennis Watson]

Anyone have it in a ecp file? Thank you.