View Full Version : Need advise for pepper mill
Craig Matheny
05-09-2013, 7:22 PM
I was at a street fair this weekend and saw a nice turned pepper mill it had a gear type handle like a cast coffee grinder. My question is anyone know where to find such a kit and is there specific woods and finishes to use that are food safe.
Thank you
Brian Libby
05-09-2013, 7:35 PM
Woodcraft carries one.
Craig Matheny
05-09-2013, 7:48 PM
I looked there but missed it thanks
Bernie Weishapl
05-09-2013, 9:54 PM
Packard Woodworks and Penn State Industries has them.
Jim Burr
05-09-2013, 11:20 PM
As a rule, stay away from the typical woods that cause problems, black walnut, cocobolo, many rosewoods, so on. I use WoP and plenty of it on the exterior, the kitchen is a harsh environment!! I'm finishing a purple heart mill in a wine bottle shape with 12 coats of WoP...can't even tell! The leading commerical makers of mills, Peugeot included, and most of the top private makers say it's taboo to do anything to the inside. Just drill it and be happy...worry about the outside!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.