View Full Version : Completed Cabinets
Rich Aldrich
04-27-2013, 8:58 PM
I made these cabinets for a friend. The first cabinet is 48" wide x 88" tall x 18" deep. The double door upper cabinet is 37" tall, x 34" wide x 12" deep. The single door upper cabinet is 37" tall x 26" wide x 12" deep. They are all made of maple lumber and birch plywood - all from Timber Products - my employer. She wanted these painted white. I used Valspar Satin White Premium Enamel.
Paul McGaha
04-27-2013, 9:58 PM
Really nice Rich. I like the cabinets a lot. Having that kind of storage in the laundry room would be very useful.
Good job.
PHM
Stephen Cherry
04-27-2013, 11:16 PM
Looks great!
Gary Hodgin
04-27-2013, 11:28 PM
Nice work.
jim gossage
04-28-2013, 5:51 AM
Yes, nice work.
Tony Rodoracio
04-28-2013, 10:19 AM
Well done Rich. The finish looks good. Did you spray or brush?
Rich Aldrich
04-28-2013, 11:46 AM
Thank you for the comments.
I rolled most of it and used a foam "brushs" for the hard to get to areas. The rollers came from Lowes and were for cabinets and doors. The rollers are much smaller than normal - 3" long and maybe 1 14" diameter. I really like them.
I wasnt thrilled to paint wood, but I do what the customer wants. This was my first paint job and I learned a lot. Spray might be better. My customer was very happy anyway.
Rich Riddle
04-28-2013, 6:12 PM
Rich,
I will be your friend if you send a set of cabinets like those to Kentucky. Nice work.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.