View Full Version : Table saw miter sled
Robert Chapman
04-26-2013, 9:21 PM
I'm about to start building picture frames so I need to construct a table saw miter sled. I have some good looking plans from WoodsmithShop.com and I'm looking for ideas to improve on those plans or for other plans.
Thanks
Cary Falk
04-26-2013, 10:21 PM
I made one similar to this.
http://www.finewoodworking.com/uploadedimages/fine_woodworking_network/image_resources/PDF/low-miter-sled.jpg
But I use the Incra 1000SE and Miter Express combo the most.
http://www.incra.com/images/mitergauge_miterexpress_main.jpg
Pat Barry
04-26-2013, 10:34 PM
I did one like the drawing but with a thick piece across the front to keep it together. Thicker than I could cut through.
Bill Huber
04-27-2013, 9:18 AM
I'm about to start building picture frames so I need to construct a table saw miter sled. I have some good looking plans from WoodsmithShop.com and I'm looking for ideas to improve on those plans or for other plans.
Thanks
I don't know what your plans have in it but they are really simple.
The thing that took be awhile to get though my head was to cut on both sides of the sled, that way the will always fit together perfect.
This is the one I use now, I have 3M stair tread tape on it so thing won't slip.
260991
Robert Chapman
04-27-2013, 10:11 AM
Bill - thanks for the idea about the stair tread tape. I'll try it.
Roy Turbett
04-27-2013, 3:06 PM
Check out this link.
http://www.eaglelakewoodworking.com/post/Super-Sled-Crosscut-and-Miter-Sled.aspx
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.