Harry Robinette
04-25-2013, 9:11 PM
260888260889260890260891260892260893Well I got the pictures to work.The VFD and motor are hooked together and running.Now the problem of pulley's begins. As you can see in pic's 2,3,5,this is the reeves drive with the middle sheave moving back and forth as one belt tightens and one loosens.Pic 4 this is were the Reeves drive is located so putting in a set of pulley's for a high and low range moved manually is going to be a problem.:confused:
cost adding up:
link belt: $40.00
Brakeing resistor $21.13
3ph emer stop switch:$8.82
cable for wired remote:$37.50
remote mount: $13.00
total for this round: $120.45
Still have to get pulleys,THEN MOUNT EVERYTHING AND MAKE IT RUN.:eek:
Will try to keep posted as I go.
cost adding up:
link belt: $40.00
Brakeing resistor $21.13
3ph emer stop switch:$8.82
cable for wired remote:$37.50
remote mount: $13.00
total for this round: $120.45
Still have to get pulleys,THEN MOUNT EVERYTHING AND MAKE IT RUN.:eek:
Will try to keep posted as I go.